1. The slideway slider of the CNC feeding machine is regular oil injection to ensure that the slider is not dry, and the slide block is easy to wear out of the ball.
2. The rack and gear shaft of the numerical control opening machine should be lubricated properly.
3. The spindle of the CNC opening machine is manually turned to see if it is fixed after loading the knife clip, and the cutting effect is not affected by the tool.
4, CNC vacuum pump vacuum pump adsorbed inside the pipe dust, dust will affect the adsorption capacity.
5. Check whether the rapid stop switch of the CNC opening machine is normal.
6, check whether there are dust and foreign objects in the heat sink of the CNC opening machine.
7, check the pressure gauge pressure of numerical control opening machine is normal.
8. Check the detail of every detail of the CNC feeding machine, where dust needs to be cleaned up as far as possible to ensure the machine.
The components are not damaged by the external conditions, and the after-sale maintenance is reduced, and the machine is used for a long time.